Ieee Control Systems Letters Impact Factor
Ieee Control Systems Letters Impact Factor – A journal paper has been accepted for publication in the journal Nonlinear Dynamics with the title: “Nonlinear effects of saturation in a car-following model”.
Giuseppe Habib is awarded the Lendület grant for the project entitled: “Dynamical integrity assessment of real-life engineering systems”
Ieee Control Systems Letters Impact Factor
David Hajdu gave a conference talk at The 17th IFAC Workshop on Time Delay Systems (TDS 2022) with the title: “Experimental study and numerical simulation of syetry breaking effect in milling operations”.
The Annual Awards Ceremony Of The Ieee Control Systems Society
Two conference papers were presented by Adam K. Kiss at The 17th IFAC Workshop on Time Delay Systems (TDS 2022) on safety-critical control entitled: “Control Barrier Functionals: Safety-Critical Control with Time Delay” and “Input-To-State Security with Time Delay input in longitudinal vehicle control.
A poster presentation was given by Zoltan Gabos at The 38th Danubia Adria Symposium (DAS 2022) and has been accepted into the related abstract of the conference with the title: “Control-based continuation: case study on a nonlinear slender beam structure” by authors: Zoltan Gabos, Zoltan Dombovari .
A poster presentation was given by András Bártfai at The 38th Danubia Adria Symposium (DAS 2022) with the title: “Demonstration of optimal setting measurement on an adjustable clamping table with a polymer workpiece”.
A journal article has been published online in the International Journal of Non-Linear Mechanics with the title: “Hopf bifurcation calculation in neutral delay differential equations: Nonlinear robotic arms subject to delayed acceleration feedback control”.
Welcome To Mlcs
A poster was presented by Zoltan Gabos at the 30th International Conference on Noise and Vibration Engineering (ISMA 2022) and has been accepted for a related conference paper entitled: “An example of experimental analysis of nonlinear mechanical systems in one degree of freedom”. authors: Zoltan Gabos, Zoltan Dombovari, Zoltan Gazdagh.
A paper was published by András Bártfai in the Proceedings of the ISMA 2022 conference, on the finite-time stability of dynamic stability loss in a single degree-of-freedom system.
Momentum Team member András Bártfai received a ÚNKP scholarship for the research topic “Experimental analysis of a milling process with time-dependent parameters”.
Momentum Team member Zsolt Iklódi was awarded a ÚNKP scholarship on the research topic “Impact of automated vehicles with connected cruise control and accident prevention rules on the global traffic system”.
Mta Bme Lendület Machine Tool Vibration Research Group
A virtual lecture was delivered by András Bártfai at the ASME IDETC-CIE conference 2021 entitled “Robotic machining applications: delayed acceleration feedback control in milling”.
Lecture delivered by Zoltan Gabos at the 17th International Conference on Multibody Systems, Nonlinear Dynamics and Control (MSNDC 2022) and accepted related abstract entitled: “Stability analysis of steady branches for stochastically excited one degree-of-freedom systems with geometric nonlinearity” by authors: Zoltan Gabos, Zoltan Dombovari.
Lecture delivered by Zsolt Iklódi at the ASME IDETC-CIE 2022 conference, on models of the dynamics of machines in motion, in the presence of damping and delayed controller feedback.
The paper written by Andras Bartfai, Asier Barrios and Zoltan Dombovari won third place in the Student Paper Competition at the MSNDC Student Paper Competition of the ASME IDETC-CIE 2022 Conference.
Systems & Control
Paper presented by András Bártfai at the ASME IDETC-CIE 2022 conference, on stability analysis of a single degree of freedom robot model with visible digital acceleration feedback control in milling.
András Bártfai presented a conference paper at the ENOC 2022 conference with the title: “Bistability in nonlinear elastic robotic arms subject to delayed feedback control”.
At the 10th European Nonlinear Dynamics Conference (ENOC 2020) a talk was given on parameter identification in milling with the title “Parameter identification of periodic systems by impulse dynamic subspace description”.
A journal paper has been submitted to the International Journal of Robust and Nonlinear Control with the title: “Control Barrier Functionals: Safety-critical Control for Time Delay Systems”. The paper discusses a theoretical framework for safety-critical control of nonlinear delay systems.
Hierarchical Control Of Soft Manipulators Towards Unstructured Interactions
A paper has been submitted for publication in the Journal of Vibration and Control entitled: “Stability Analysis of Digital Hierarchical Control of Autonomous Vehicles with Multiple Time Delays”.
A research article has been accepted for publication in the journal Nonlinear Dynamics with the title: “Bifurcations analysis in implicit maps through the dynamics of cumulated surface errors in milling”. The paper discusses the mathematical tool of bivariate analysis for implicit maps and its application to the interaction of surface errors.
An article has been published in the journal Nonlinear Dynamics with the title: “Bistability and delayed acceleration feedback control, analytical study of collocated and non-collocated cases”.
A research paper has been accepted for publication in the Journal of Sound and Vibration with the title: “In-process impulse response of milling to identifying stability properties with signal processing”.
Information For Authors
A journal article was published in the Journal of Sound and Vibration, on bistable regions of the stability maps in boring bar cutting with closed tuned mass dampers.
Member of the Momentum Team Zoltan Gabos was awarded a ÚNKP scholarship on the research topic “Extension of parametric analysis techniques considering near-linear variable damping of a vibrating mechanical system with geometric nonlinearity”.
A seminar talk was given by Adam Kiss in the joint seminar series of BME – Karlsruhe Institute of Technology with the title: “Safety-Critical Control Design for Time Delay Systems”.
A curved uncut chip thickness model is presented to predict cutting forces for general uncut chip geometries. The concept of the model is published in a technical report (arXiv).
Laboratory For Financial And Risk Analytics
A lecture virtually delivered by Adam Kiss at the 16th IFAC Workshop on Time Delay Systems (TDS 2021) and the associated extended abstract has been accepted with the title: “Safety-Critical Control Design for Time Delay Systems Using Control Barrier Functions”, by Adam K. Kiss, Tamas G. Molnar, Aaron Ames and Gabor Orosz.
A talk was virtually delivered by Tamas G Molnar at the 16th IFAC Workshop on Time Delay Systems (TDS 2021) and the associated abstract has been accepted with the title: “Synthesizing Safety-Critical Controllers for Systems with Input Delay”, by the authors. : Tamas G. Molnar, Adam K. Kiss, Aaron Ames and Gabor Orosz.
The research group has acquired an NI CompactRIO 9039 FPGA controller to develop an active chat controller design.
A virtual lecture was given by András Bártfai at the TDS 2021 conference entitled “Case study of stability of advanced delay differential equations with digital controllers”.
Pdf) Optimal Lqg Control Of Networked Systems Under Traffic Correlated Delay And Dropout
A research paper has been accepted for publication in a special issue of the Scientific Journal associated with the CIRP HSM2021 conference entitled: “Dynamic description of milling based on perturbed feed motion”.
A research paper has been accepted for publication in a special issue of the Scientific Journal related to the CIRP HSM2021 conference with the title: “Talk detection based on touch sensors in milling operations”.
Virtual lecture delivered by Zsolt Iklódi at the 2021 ASME IDETC-CIE Conference on Analytical Stability Analysis of Highly Interrupted Chat.
A research paper has been submitted to the Journal of Sound and Vibration with the title: “In-process impulse response of milling to identify stability properties with signal processing”. The paper deals with interference during processing and tracking multipliers.
Ieee Istas 2022
Paper presented at the 2021 US Board of Control Conference on Critical Safety Management Systems entitled “Safety Certification for Nonlinear Time-Delay Systems with Safety Functions: A Discrimination-Based Approach”.
Henrik T. Sykora has successfully defended his PhD thesis entitled: Dynamics of Stochastic Mechanical Systems with Delays. The instructor was Daniel Bachrathy who was also a team member.
A journal paper has been submitted to IEEE Control Systems Letters (L-CSS) with the title: “Predicting the Future to Avoid Hazards: Combining Safety-Critical Controllers with Input Delay”.
With the title: “Bifurcations in implicit map: Dynamics of cumulated surface errors in milling”. The journal deals with the dual analysis of surface faults.
Air Cv Official Page
PI’s research paper has been accepted for publication in the prestigious International Journal of Machine Tools and Manufacture in the field of manufacturing. The title of the paper is:
The research paper has been submitted for publication in the prestigious journal CIRP Annals Manufacturing Technology. The title of the paper is:
A journal article was published in the International Journal of Sensors on how to apply a Kalman filter to power dynamics. The online version of the paper can be downloaded here with the title “Updated Kalman filtering of cutting forces in milling”.
A journal article was submitted to IEEE Control Systems Letters (L-CSS) with the title: “Certifying Safety for Nonlinear Time Delay Systems via Safety Functionals: A Discretization Based Approach”. The journal is about security sets for nonlinear time-delay systems.
Pdf) Pd Like Regulation Of Mechanical Systems With Prescribed Bounds Of Exponential Stability: The Point To Point Case
A journal article was accepted for publication in Applied Mathematical Modeling with the title: “Stochastic Semidiscretization Method: Second Moment Stability Analysis of Linear Stochastic Periodic Dynamical Systems with Delays” by Henrik Sykora and Dániel Bachrathy.
A journal article was published in the Journal of Manufacturing and Materials Processing with the title: “I-Process Monitoring of Changing Dynamics of a Thin-Walled Component During Milling Operation by Ball Shooter Excitation”.
The main idea behind implementing response function measurements directly into a stability calculation was presented in the special issue on Machine Tool Dynamics in JP. The title of the thesis is “The Basics of Time-Domain-Based Milling Stability Prediction Using Frequency Response Function”.
New cutting force models